Veo Pan and Tilt Bedienungsanleitung PDF herunterladen (Seite 34)

3. By default, the entire camera view is used as a motion detection region. This means that any motion in the

camera view will cause a motion event, and the frames will be recorded accordingly. Partial regions can be

set up by selecting the AREA SETUP button. Highlight AREA SETUP and press ENTER. You will see a

window similar to the image below:

4. You will see a full screen view of the camera with a blue grid overlaid on the camera view. Notice a green

box that can be moved around the screen. When the cell that you want to disable is highlighted, press

ENTER, the box becomes blue. This becomes your starting point, and can move in any direction. From

here, you can drag the blue box to adjacent cells to highlight a region. Press ENTER again, and you will

see the blue-coloured cells become clear. This means that this cell is not included in the motion detection

region.

5. Press RETURN, and you will see the following screen:

6. Choose SELECT ALL to highlight the entire region again, DESELECT ALL to disable the motion detection

region on this camera, CANCEL to cancel the changes, or SAVE & EXIT to save the changes that you made

and return to the previous menu. CANCEL and SAVE & EXIT options returns back to the previous menu.

WORKING WITH RECORDED VIDEO

You can search for recorded video by recording date or event, play back recorded video, and back up

video to a CD-R/RW, DVD-R/RW media or USB flash memory device.

SEARCHING FOR VIDEO

1. Press the SEARCH button on the front panel of the Veo 120XXN, and then enter your password in the login

screen. Remember that only Administrators and Managers can search and backup the video. For the list of

account permissions and limitations, please refer to Table A on page 14.

2. On the Search menu, select the type of search you want to perform, and then press the ENTER button. To search

for video by time, proceed to step 3. To search for video by event, proceed to step 7.

3. If you choose to search by time, a calendar appears. Press the ARROW buttons to select a date on the current

month or select a different month, and then press the ENTER button after you have selected a date. The days that

contain video recording are highlighted orange.

Figure 60. Motion Detection Region Window

Figure 61. Motion Detection Region Setup

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Keine Kommentare

Veo Pan and Tilt Bedienungsanleitung Seite 34